Windshield mount for Valentine One radar detector

prusaprinters

<p>This is a mount for the Valentine One radar detector. It is angled to be level on my Acura TL. If your windshield is a different angle your detector wont be level which will reduce range.</p> <p>You need two short machine screws and matching nuts, You will also need the included suction mount. I mounted the print directly on to the windshield with the clear 3M Dual Lock Reclosable Fastener tape.</p> <p>You'll need the bolts to have heads that will countersink into the print.</p> <p>order of parts</p> <p>windshield - 3M tape - print - bolts - original mount - nuts</p> <p>A new version with a holder for a tripp lite RJ-11 In-Line Coupler now made. The Coupler is friction fit and makes it easy to replace a shorter rj11 cable when the tab breaks instead of the V1 cable.</p> <p>I do believe this design works with V1 Gen 2 as the holes are the same distance as the V1 gen 1.</p> <p>I would be willing to redesign this with other angles in mind or with spacers for a custom angle. I would also like to make it easier to keep the screw/nuts tight as the loosen over time. Currently I have to remove it from my windshield and peel back the 3m tap to tighten.</p> <p>Otherwise it's going over a year strong printed with PETG!</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Wanhao</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Wanhao Duplicator i3 Plus</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Infill:</strong></p> <p>20</p> <p><strong>Filament:</strong></p> eSun PETG <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>Printed on a glass bed, the print sticks to the 3m tape without much issue. </p> Make sure print is flat, model likes to be angled a bit. </div></p></p> Category: Automotive