wild birds feeder

thingiverse

wild birds feeding column for hanging. The following is still required: Plexiglass tube 80/74mm melting thread 2ea M6, 4ea M4 ring screw M6, washer M6, M4 and M6 screws Silicone glue or plastic glue to glue adapters top and bottom to the Plexiglas tube. I printed with 0.6mm Nozzel and 0.3mm layer, in PLA+ the sealings are printed with 0,4mm nozzel with TPU. The filling funnel is a useful aid. Adapter top belongs on top of the tube and is screwed into the cover with the 4 bars. First a seal is put on the body, then the roof, another seal, then the tube with the bottom adapter. the smal seals are used for the 4ea m4 screws that screw the adapter bottom to the body update 11.05.2023: some fine tuning to improve the fit. the roof has been enlarged a little (to 220mm diameter). The diameter of the feeding bowl has been reduced by 10mm. update 13.05.2023: i made a small change to the openings on the body and enlarged the feed bowl by 5mm again. I increased the seat ring by 10mm. Find everything in the V2 files. leave the V1 versions but also stand update 04.11.2023: I added another roof. For this, a 3.5mm seal is required above and below. I took 3.5mm round cord and cut it to the appropriate length and glued it together at the end with superglue. https://www.amazon.de/dp/B0BD5PLVQH? The self-printing seal for the "old" roof has proven to be impractical, so instead I'm now using a 2.4mm seal. https://www.amazon.de/gp/product/B07JCRKYV3/ref=ppx_yo_dt_b_search_asin_title?