Wiha Driver Rack for workbench

thingiverse

<h1>Design</h1> Storage and organization rack for precision drivers designed to mount to a workbench which accommodates [hanging bins](https://www.uline.com/BL_305/Uline-Plastic-Stackable-Bins). Specifically made for [Wiha drivers](https://www.wihatools.com/products/precision-slotted-phillips-screwdrivers-7-piece-set), may fit others as well. <h1>Hardware Needed</h1> * QTY 4 threaded inserts for plastic. Recommend [4-40](https://www.mcmaster.com/93365A122/) or [M3](https://www.mcmaster.com/94180A333/) heat-set inserts. * QTY 4 screws that match inserts. Sized for 4-40 X 3/8 cap screws. [M3 X 8](https://www.mcmaster.com/91292A112/) or [M3 X 10](https://www.mcmaster.com/91292A113/) would also work. * ~2 cm^2 X 3mm adhesive-backed foam rubber or similar. <h1>Assembly</h1> 1. Drill out QTY 4 holes on driver rack with drill bit specified by insert size. 2. Heat-set insert flush using soldering iron or similar 3. Attach rack mount using QTY 4 screws 4. Attach small strips of foam rubber (or similar) to back flanges of mount. 5. Add some labels to identify what goes where