
whistle braille
thingiverse
# Summary This is a whistle with a lanyard loop and a pea inside. The letters and braille characters "VJA" are tactile and visible on the side of the whistle. # Instructions Estimated printing time is 46 minutes. Break the pea loose, with a Hex L-wrench (2 mm) for example, after printing. ## Filament Material [Extrudr PLA NX2](https://www.extrudr.com/en/products/catalogue/?material=128) ## Printer Prusa i3 MK3S printer with 0.4 mm nozzle. ## Printer Settings * Layer height 0.2 mm * 60 mm/s perimeter print speed * Infill 20% * No Supports # Changes We put the letters and braille characters "VJA" on the side of the whistle. The letters and braille characters are generated with the [OpenSCAD](https://openscad.org/) files vja-logo-generation.scad and braille.scad. We put the letters and braille characters with [blender](https://www.blender.org/) on the whistle, dib-whistle.blend. # Contact [https://oskars.org](https://oskars.org) [Johannes Střelka-Petz](mailto:johannes_at_oskars.org) # Copyright & License SPDX-FileCopyrightText: <text>Copyright 2022 Dajana Isakovic, Denis Sari, Johannes Strelka-Petz, Manuel Hauer, Mario Manseder, Roman Kloihofer</text> SPDX-License-Identifier: CC-BY-SA-4.0 This design is a joint effort by * Dajana Isakovic * Denis Sari * Johannes Střelka-Petz * Manuel Hauer * Mario Manseder * Roman Kloihofer This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License. To view a copy of this license, visit <http://creativecommons.org/licenses/by-sa/4.0/> or send a letter to Creative Commons, PO Box 1866, Mountain View, CA 94042, USA. ## Original Work Attribution This work is based on the [Whistle](https://www.thingiverse.com/thing:1046) designed by [Zaggo](https://www.thingiverse.com/zaggo/designs)
With this file you will be able to print whistle braille with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on whistle braille.