Wheel Chair Squeegy

thingiverse

The Wheelchair Squeegee to Dry Tires is Essential Before Entering Inside Without Using a Towel. Others Who Had Similar Problems Will Hopefully Benefit From My Solution. Print Settings: Rafts: Yes No, I Didn't Need Them, But They Can Be Useful If Needed. Supports: Not Necessary For This Print Job. Resolution: .2 Was Fine For This Model. Infill: 20 Worked Perfectly, But You May Want To Experiment With Different Settings. Notes: This Project Can Also Use Flexible Filament If Desired. However, ABS Or PLA Will Also Function Properly. The Seal Can Be Made From Gasket Material. Post-Printing Process Requires Attaching the Main Clip With Bolts and Filing Down Sharp Edges Carefully. Hinge Pins Are Often Made Of Finishing Nails. For Rubber Seals, A Material Like Old Gasket Is Ideal, With A Thickness Of Approximately 0.05" For Optimal Performance. The Reason I Designed This Accessory Is That I Broke My Ankles And Had To Spend Time Waiting For Someone Else To Drying The Tires While I Was in the Wheelchair. But Now There's a Better Solution - Simply Swing the Squeegee In As Soon As You Are One Revolution From the Clean Floor, and Your Tires Will Be Completely Dry Before Rolling Inside.