Wheel and Tyre combo for Mini E-Revo 1/16 Merv

thingiverse

This is a 1/16 wheel and tyre combo for the Merv (Mini E-Revo) These are wider than stock with a more aggressive offset to enlarge the car a little and help stability. The tyre needs to be printed in flexible filament to be able to be inserted over the wheel and slotted in the groove. Supports are recommended for the tyre or the first half of thread may wiggle. 0.15 minimum is recommended for the tyre or you may lose the dual center groove. For the lettered tyre, you can print it as is and it will carve the lettering quite ok. Or better, use the dual-color stl file to print the lettering in another color! I print it very slowly, about 15% infill and 4 outlines. I've also included a few base parts (tyre without thread, without the center ring, the center ring itself) in case someone wants to modify / make his own design. The wheel also comes in two flavors : a single color and a dual color for those dual-extruder folks who want a little more customization :)