Weekday-Clock

thingiverse

You can buy this type of clock without printing one, simply search for "Day of the Week Clock". This is a clock that shows a week instead of just one day. It's achieved by gearing down the hour ring of a normal clock movement 14 times. The clock has a diameter of 190mm, so it should fit on a 200mm print bed. To build this clock you'll need: * 1x Clock Movement with 16mm or 20mm shaft. You can buy a 20mm version at https://www.amazon.com/dp/B076F8BDV8/ and a 16mm version at https://www.amazon.com/dp/B017BYT3XC/ * 2x Bearings: 10x15x4mm, available at https://www.amazon.com/gp/product/B00RWGXNVI/ To print the clock you'll need to print the following parts: * 1x Main Body: Depending on your clock movement print the 20mm or the 16mm version. * 1x Clockwork_Gear * 1x Middle_Gear * 1x Pin * 1x Hand_Gear * 1x Lid * 1x Hand * 1x Clock_Face: You can choose between English days, German days, or a blank dial. I recommend a color change after 1.8mm. Assembly: Push the bearings into the holes. Put the clock movement gear onto the hour ring of the clock mechanism. Stick the pin in the middle gear. Attach the middle gear to the main body. Attach the hand gear to the body. Put the clock movement in and fasten with lid. Glue the clock face to the main body with Thursday on top. Attach hand and hang on wall.