Weedo Tina 2 Spool Holder with Guides
thingiverse
Resolution: 0.15mm Infill: 40% - 100% Higher infill recommended to make it more rigid Raft: No Supports: No Printed with PLA This is my contribution to the great spool holder by doctor_voctor. My spool kept wobbling around and i came up with a modular fix. Spool Bearing Mounts: snap_bearing_final_m, snap_bearing_final_f These helped to reduced friction by alot and kept the spool from shaking back and forth during prints. Just print both parts twice and add four 626ZZ bearings to them. Add a dab of glue where the two pieces meet together (Don't flood the bearings with glue). Spool Side Supports: snap_spool_guide_thin, snap_spool_guide The thin ones are supposed to be used with 1kg spools. The regular ones won't fit and are supposed to be used for smaller spools! Just snap the outer one in place after you loaded the spool. It should fit snuggly on the shaft of the holder. Enjoy a smooth filament feed :)
With this file you will be able to print Weedo Tina 2 Spool Holder with Guides with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Weedo Tina 2 Spool Holder with Guides.