Weed Spray, No Dogs Yard Sign

prusaprinters

<p>See <a href="https://www.printables.com/model/267006-two-color-inlay-w-1-extruder-small-letter-test-pri">this model if you want a quick test print for the letters</a>.</p><p>If you don't know how to print in two colors on your non-MMU PRUSA:<br><br><strong>Printer Settings</strong></p><ul><li>General<ul><li>Extruders: 2 (or more for more colors)</li></ul></li><li>Extruder 1 (or whichever extruder(s) use the first layer but aren't the first extruder to place filament)<ul><li>Lift Z: 0.3 (layer height + 0.1mm)</li><li>Lift z enforcement: Enforce on first layer</li></ul></li><li>&nbsp;Custom G-Code<ul><li>Tool change G-code: M600</li></ul></li></ul><p><strong>Print Settings</strong></p><ul><li>Skirt and Brim<ul><li>Loops: Set to # of layers that have different colors (if 2 colors goes 0.4mm up and you're printing at 0.2mm layer height, use 3 loops)</li><li>Skirt height: Same as above</li></ul></li><li>Multiple extruders<ul><li>Wipe tower: disable</li></ul></li></ul><p><strong>Slicer Setup</strong></p><ol><li>Import <code>BlackWeedSpray.stl</code> into PrusaSlicer</li><li>Right-click on it in the right pane and select "Add Part &gt; Load"</li><li>Select <code>WhiteWeedSpray.stl</code></li><li>Ensure the component (and parts) are flipped so that the appropriate side is face-down</li><li>Ensure settings above are used</li><li>Right click each part in the right pane and select "Change extruder" and select the appropriate one</li><li>Inspect the "Gcode preview" and note which color prints first</li><li>Export the <code>.stl</code> and then edit it with a text editor</li><li>Remove the first <code>M600</code> command if your printer is already set with the appropriate first color</li><li>Start printing and swap colors as necessary</li></ol><p>&nbsp;</p>