Weed Puller - 1/2" EMT
prusaprinters
Simple weed puller using ½" EMT and 3 ½" 16D galvanized nails. To remove weeds, push over weed, twist handle and pull. If you prefer to use ¾" PVC, use this model: https://www.printables.com/model/461240-weed-puller-34-pvcCut length of EMT tubing to a comfortable length (36-46"). Hammer nails into tip with the tubing opening facing up. Make sure to recess nail heads. Secure to one end of tubing with super glue. Use rivet holes to drill tubing using 1/8" drill bit. Secure with rivet (5/8" x 1/8") or metal screw.Secure handle to the other end of the tubing using super glue. Use rivet holes to drill tubing using 1/8" drill bit. Secure with rivet (5/8" x 1/8") or metal screw.Depending on your printer calibration, you may need to adjust XY scaling (98%-102%). Use “fit-test” part to determine best fit vs scale. Apply same scaling to other parts.Print with PLA+ or PETG with at least 4 shells/walls. Print in the orientation provided. No supports required.
With this file you will be able to print Weed Puller - 1/2" EMT with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Weed Puller - 1/2" EMT.