webcam holder

grabcad

A holder for Logitech webcam (the one in picture) which can be fixed on a Kinova robot arm (Jaco2 arm)Needs:- two M3x8 screws (any length between 6 mm to 9 mm will work)-one M3x15 (or longer) screw.-one normal M3 nut (hexagonal) - two plastic insert nuts M3.-a piece of elastic material fixed on the inner wall of the rings, I used double face tape but without removing the seal (so only one side is exposed). The purpose of this is not to harm the robot arm.How to 3D print:The part should be printed with a dual extruder with the lowest layer height. I used PLA and PVA as a support. The printer I used is the Ultimaker S5, nozzle 0.4, layer height 0.06mm for both the PVA and the PLA. If you have a single extruder printer, you may print the parts with a 0.25 nozzle and with support.