Weather station

thingiverse

This is a small project for a weather station based on 1" PVC pipe and several sensors: - BME280 (temperature, pressure, humidity) - Anemometer (https://www.adafruit.com/product/1733) - Tipping bucket rain gauge (https://www.ambientweather.com/amwewsragare.html) - Wind vane (https://www.pishop.co.za/store/maplin-wind-direction-sensor) - 1090Mhz ADS-B antenna to receive aircraft transponder messages (this is not really related to the weather side of the story, but it's cool anyway) (https://www.aliexpress.com/item/32842769264.html) A few additional models need to be printed: - Adafruit Anemometer 1/4-20 adapter https://www.thingiverse.com/thing:2710360 print "Anemometer_Adapter_riser_version.stl" - Large Sun Screen (Stevenson Screen) for 1-wire temperature sensors https://www.thingiverse.com/thing:873879 print "Large_Stevenson_Screen_v2_1_Main_Sun_Shield.STL" and "Large_Stevenson_Screen_v2_1_Mount_32mm.STL" All parts fit together except for the "bme280_stevenson_to_1_inch_pipe_L_joint.stl" piece, which must be glued to the "Large_Stevenson_Screen_v2_1_Mount_32mm.STL" using some hot glue. All joints require a PG7 cable gland to secure the cable and route it inside the PVC pipe. Zip ties can also be added to make the whole assembly more sturdy.