WEARABLE FULL SIZE STAR WARS DARTH VADER HELMET JESUS SALMERON 3D print model

WEARABLE FULL SIZE STAR WARS DARTH VADER HELMET JESUS SALMERON 3D print model

cgtrader

This helmet is a large wearable accessory that's easy to assemble from its numerous components. To print it in its full size, you'll need a 40x40cm 3D printer like the Creality CR-10 S4 or similar models; anything smaller may require trimming the dome before printing. Print settings should include using 0.2 mm layers, and the "Modified Chris Elkin's profil" should be utilized, set at three perimeters, a print speed of 40mm/s, with last perimeter reduced to 30%, 10% infill density, 50°C heated chamber temperature and a 210°C hot end. PLA filament should be used. Five neodymium magnets are required to secure the head piece onto the dome itself; an additional metal washer for reinforcement or alternative parts will suffice. For magnetic attachment you'll also require five screws. An essential purchase would be 10 PCS -20x10x3mm rare earth block N35 Super-Strong Ring-Block-Neodymium Magnet with a hole at one end and they're very effective when combined together, these items are obtainable on AliExpress at: https://fr.aliexpress.com/item/32464154774.html?spm=a2g0w.10010108.1000016.1.f0374bbbY6ZhwC Steel bearings and small fans can also be used but are not needed.

Download Model from cgtrader

With this file you will be able to print WEARABLE FULL SIZE STAR WARS DARTH VADER HELMET JESUS SALMERON 3D print model with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on WEARABLE FULL SIZE STAR WARS DARTH VADER HELMET JESUS SALMERON 3D print model.