WAXTENNA PRD (Portable Rotatable Dipole)

thingiverse

The file Tee+V.stl has a 3/8" hole at the top to attach another arm, making it suitable as a Vertical support. This contrasts with the file Tee.stl, which features holes on the sides for use as a Dipole. This center support is designed for a Painter Pole mounted Dipole Antenna based on my previously published item at https://www.thingiverse.com/thing:2352109. The fourth photo showcases the antenna with a bio-rotator unit at its base. To assemble this project, you will need two 3/8-24 coupling nuts that are 1 1/8 inches long, as well as two one inch long 3/8-24 bolts and two 3/8" washers. You may also want to use two 3/8" Lugs to secure the Coax to each side. You can install a piece of Co-ax with a BNC connector on the end by using a grommet, or you can simply mount a BNC connector in the hole. One option is to print one arm in Red PLA, while another option is to print the Arm Ring in Red PLA and install it on the arm connected to the center conductor of the co-ax. When combined with two Loading Coils and either two Folding antennas or two 9' long telescoping whip antenna's similar to those sold by Buddi-Pole, this setup can create a Portable 40M Dipole Antenna that you can rotate manually by rotating the Painter Pole. However, I do not recommend using this for continuous service, as it is not designed to withstand prolonged exposure to outdoor conditions.