Water Feed for "Modular Drop Riffle Sluice (Small)"

thingiverse

**Printed and tested pictures to come** This is a water feed tap addition for "Modular Drop Riffle Sluice (Small)" by Trippsy25, found here: https://www.thingiverse.com/thing:1897847 I printed the above at 50% width and 75% height as a cleanup sluice, it worked very well but I wanted a water feed for it. I designed this piece to do that. It was designed to print with minimal support in mind using the pictured orientation. I have only printed the cleanup size but have provided full size files as well. The cleanup sluice worked fantastic as a recirculating system with this pump from Amazon and some 1/2" tubing (not an affiliate link): https://www.amazon.ca/800GPH-Submersible-Aquarium-Fountain-Hydroponics/dp/B071RVPNQL **To print you require:** 1x Chamber (50% scale if cleanup sized or 100% scale if full sized) 1x Matching scale Chamber Cap 1x Hose input (scale to match parts chosen above and diameter to match the inner diameter of your hose) 1x Smoother (to be scaled in your slicer, leave at 100% if full sized or scale 50% width and 75% height if cleanup sized) 1x Feed (to be scaled in your slicer, leave at 100% if full sized or scale 50% width and 75% height if cleanup sized) Some super glue. **To assemble:** - Glue cap onto chamber - Glue hose tap into hole on the chamber top. The hole may need a touch of filing to fit through, but it will print fine without support. - Insert the Chamber into the body at the rear with the holes facing the open end - Insert the smoother in the front - The pieces are designed to be a tight fit; some smoothing may be needed on the edges to get the parts to fit. I chose not to glue the chamber and the smoother together to facilitate cleaning, but they can be glued. **To use:** Feed your cons slowly between the smoother and water chamber. **To Do list:** - Model and add 100% scale 1/2" inner diameter hose tap - If requested, model and add taps for other hose diameters - Add pictures