Watch band keeper

prusaprinters

<p>Keeper for a watch band. I used flexible filament to print this, this allows the keeper to grip the excess strap. I haven't tried with rigid filament so I don't know how well it will work.</p><p>To use:</p><ol><li>Measure the width of the strap in mm. Enter this value in the<strong>Inner Width</strong> field.</li><li>Measure the thickness of the strap in mm. Multiply this by 2 and enter the value in the<strong>Inner Height</strong> field.</li><li>Enter the<strong>Depth</strong> of the keeper in mm. This is the dimension of the keeper along the strap.</li><li>Enter the<strong>Thickness</strong> of the keeper, i.e. the distance between the inside and outside surfaces of the keeper. 1mm works well.</li><li>Select the<strong>Edge Type</strong> You like; squared or rounded.</li></ol><h3>Print Settings</h3><p><strong>Printer:</strong></p><p>Makerfarm Pegasus 10"</p><p><strong>Rafts:</strong></p><p>No</p><p><strong>Supports:</strong></p><p>No</p><p><strong>Resolution:</strong></p><p>0.2mm</p><p><strong>Infill:</strong></p><p>0%</p>