Washing Machine Appliance Trap / Blanking Cap

prusaprinters

Washing Machine Blanking Cap \ Appliance Trap *UPDATE* Version 12. Thickened the walls for the screw. Thread goes throughout After doing the washing, the hose had no place to rest and would fall on the floor and cause water to leak on the floor and under the washing machine. Since we don't use the hot water connection, I created a Blanking Cap \ Appliance Trap to fit neatly onto that connection and hold the hose pipe. I printed at 0.2 but to get a cleaner accurate connection, 0.15 is recommended. I always print with 100% infill for more strength but you can choose your own infill. Print Settings Printer Brand: Creality Printer: Ender 2 Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 Infill: 100 Filament: Wanhao PLA Natural Notes: Supports (If using Cura) will only be needed for the centre of the pipe holder. How I Designed This =================== Using Fusion360, I took measurements from the original Blanking Cap \ Appliance Trap. Using these measurements, I made sketches and then extruded them out. My idea was to make it as close as possible to the original cap but with an extra hook to hold the hose pipe. After 7 modified ideas, I finally reached the 8th idea which has gone through daily testing. Version 8 Version 12 Category: Household