Washer stamping jig (printer friendly)
prusaprinters
<p>A jig for stamping your bitcoin mnemonic on DIN9021 M8 washers with 24mm outer diameter. </p><p>Because of endless warping issues with the original “blockmit” V3 jig design, I made a new, more printer friendly design.</p><p>Adjust for your stamps and washer size by scaling and adjusting the hole expansion, if necessary. This model fits 6mm x 6mm stamps with some extra tolerance (mine are more like 6.4 mm x 6.4mm) and has quite tight tolerances for the jig insert. Best printed with low speed for enhanced accuracy.</p><p>Use some double-sided adhesive tape on a steel block or anvil to fix the position of the washer and the jig on the block, then begin stamping.</p><p>Have fun!</p>
With this file you will be able to print Washer stamping jig (printer friendly) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Washer stamping jig (printer friendly).