Wash and Cure 2.0 adapter for Wash and Cure Plus station
prusaprinters
If you want use the container of a wash and cure 2.0 for usage with a wash and cure plus, then you need this adapter agitator, you have to use a material which is resistant to IPA or water. For IPA I recommand using PP or PA. If you take a bit more care about it, you can also use PETG. Please check out the resistance graph below:Source: Prusament.comFor assambly you need the folowing parts:20mm Magnets (Amazon)5x16mm Bearings (Amazon)M3 Heat inserts OD 4,7mm (Amazon)Place the bearing firstly into your agitator. Use a flat surface to press it in. Afterwards, place the heat inserts into your printed part. Then you can insert the magnets and screw it into the threads with the bolts. Als Amazon-Partner verdiene ich an qualifizierten Verkäufen
With this file you will be able to print Wash and Cure 2.0 adapter for Wash and Cure Plus station with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Wash and Cure 2.0 adapter for Wash and Cure Plus station.