Warcry Box

thingiverse

# Warcry Warband Storage box ## What this is Storage box that slides in sleeve stile for your minis. Needs a magnetized sheet and strong earth magnets to hold your minis in place for storage and travel. For travel I would suggest you add some foam inside. The box also has a "drawer" for sleeved warband cards and space for the main card. It can easily fit up to 12 minis (25/28mm), you might be able to cram in some more. There is no extra space for dice, I might extend the box in order to fit some, ## Things you are going to need - [Magnet sheet 6x4 inches](https://www.amazon.com/gp/product/B01E7V00W0/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1) - [Magnets 5mmx2mm](https://www.amazon.com/gp/product/B07G75MPH4/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1) - Superglue/Gorilla Glue/Cyanocrylate ## Things I'll add at some point - Token box | magnetized so can be fitted like a mini. - Warband logos ## Instructions **** I Highly recommend using PETG material for this print **** ### What to Print 1. Print all the big parts. 2. Print 5 Screws 3. Print 2 bottom feet 4. Print the logo 5. *N* magnet rings, where *N* is the number of minis you want to store ### How to assemble Looking at the diagrams will give you a good idea of what goes where. 1. Screw the back, A-side and B-side together, add some glue if you want, the box holds fairly well without it. 2. Glue the top to 3 sides you just assembled. The hole on the top has to point to the side with no wall (it will screw to the main body to keep the box closed. 3. Screw the bottom and front together, add some glue if you want. 4. Glue the feet to the opposite end of the bottom with no screws. 5. Glue the warcry logo to the top. 6. Glue the magnetic sheet (if you bought from the link they come with 3m tape) to the bottom part, on the face that will end up inside of the box, your magnets have to be touching the sheet. 7. Insert the magnets into the magnet rings halfway, glue to the base and push in the magnet on a straight piece of wood of table so the magnet ends up flushed to the base. *Note: if you don't do this, the magnet will make the base unstable, and the mini will pivot and move inside of the box.* Thanks to Despropositoys from whom I swiped the warcry logo, look at his awesome panel here https://www.thingiverse.com/thing:4485650 (Gracias por el excelente modelo!!)