Wanhao i3 Maker Select Filament Guide & Riser - 4mm Short

thingiverse

I was really impressed by the original design, but because I had a spool holder that was somewhat cobbled together, I needed a shortened screw bracket and extended arm for clearance. I've included the source files in case anyone wants to make changes. Cheers! I already have inquiries on the spool holder, so here are the two things I used to create it. Prusa i3 mk2 Easy Spool Holder/Rollers - Low Rider Remix http://www.thingiverse.com/thing:1967113 I printed the nuts and bolts (two each) with PLA, and the rollers (two) out of TPU. Wanhao i3 Duplicator Spool Holder http://www.thingiverse.com/thing:1635585 I printed the left, right, and locks (two) out of PLA. I had to drill/file out the M5 holes on the left, right, and locks to fit the M8 bolts I printed. It might be easier just to edit the obj file. I also edited the locks to slim them down to 2mm depth, but I doubt that will be an issue. Toss the bearings inside the rollers (four total), put the locks upside down between the left/right and rollers. Additionally, if you do edit the left/right files for the holes, you can add a vertical piece (I'd use the lock as a template) so that if the spool tracks left or right, it has something to stop it. I already had it printed, so I just flipped the lock pieces. Cheers! Print Settings Printer: Monoprice Maker Select v2 Rafts: No Supports: No Resolution: 0.16 Infill: 70% Notes: Don't be an idiot like me and split the two pieces. They're designed to be printed within each other, I printed in PLA+ and it came out beautifully. You can probably use lower infill, but I prefer more on pieces that extend out into the air.