Wanhao i3 BLTouch adjustable height mounting bracket Diii and Eiii compatible

thingiverse

I have a Diii and Eiii cooler on my Wanhao i3 Plus and created this BLTouch mount in order to clear both the Diii and Eiii fan cases. I wanted the height to be easily adjustable. This is version 1 and I am unhappy with the tightness between the slide mount screw and the BLTouch case, but it is still very easy to install and adjust. This will also work on stock printers without the Diii and Eiii coolers. There are two types of slides; one has recessed BLTouch M3 nut holes for a flush look and the other does not. The slide with the nut holes will require supports, while the one without holes does not need any supports. Here is a file summary: BLTouchV1Both.stl - Both the slide and the frame together, M3 nuts sit on top of the slide. BLTouchV1Frame.stl - Frame alone if you want to print it separately from the slide. BLTouchV1Slide.stl - Slide alone if you want to print it separately from the frame, M3 nuts sit on top of the slide. BLTouchV1BothNut.stl - Both the slide and frame together, M3 nuts are recessed for a flush look. Supports are required to print this (I used only tree supports in Cura). BLTouchV1SlideNut.stl - M3 nut recessed flush look slide alone if you want to print it separately from the frame.