
Wanhao duplicator i3 heatbed cabling strain relief
thingiverse
The cable strain relief consists of two parts: a top side that relieves cable strain and a bottom part serving as a nut holder for two M3 nuts, keeping the assembly in place. These two parts are secured together with two M3x10mm screws via the 20x20mm square hole on the build plate. A sheet metal portion of the buildplate is squeezed between them. The height of the strain relief allows the heatbed to level, and the buildplate can slide freely without colliding into the printer's frame. A 3mm zip tie fastens the cable to the strain relief. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: No Supports: Yes Resolution: 0.2 Infill: 40% Notes: PLA material (ABS not needed, because the strain relief is not connected to the heatbed) wall thickness 0.8mm top/bottom thickness 0.8mm support density 20% support placement: touching buildplate
With this file you will be able to print Wanhao duplicator i3 heatbed cabling strain relief with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Wanhao duplicator i3 heatbed cabling strain relief.