Wanhao Duplicator i3 GoPro or 6mm camera mount

thingiverse

This takes some elements from my hotbed strain relief and allows a GoPro or any suitably light camera to be clamped to the Y-axis lower aluminium plate, which can be found here: http://www.thingiverse.com/thing:1387821. The M8 locking bolt and curved bolt plate clamp are the same parts as the heatbed strain relief. The GoPro mount part has a 6mm hole without a thread, I made a small bolt to fix into the GoPro circular mount but this needs tweaking as not a good fit (so I have not included this yet). A metal 1/4"-20 thread about 10mm long should work fine if you have one and I would consider a metal bolt a better option, hot shoe mount like the one below works perfectly here: https://www.aliexpress.com/item/HOT-Aluminum-Metal-1-4-20-Tripod-Screw-Hot-Shoe-Mount-Adapter-to-Flash-Shoe-Umbrella/32735988119.html?spm=2114.01010208.3.80.Amqtks&ws_ab_test=searchweb0_0,searchweb201602_1_10065_10068_10000032_119_10000025_10000029_430_10000028_10060_10062_10056_10055_10000062_10054_10059_10099_10000022_10000012_10103_10000015_10102_10096_10000018_10000019_10000056_10000059_10052_10053_10107_10050_10106_10051_10000053_10000007_10000050_10084_10118_10083_10000047_10080_10082_10081_10110_10111_10112_10113_10114_10115_10000041_10000044_10078_10079_10000038_429_10073_10000035_10121-10050,searchweb201603_9,afswitch_1,single_sort_2_price_asc&btsid=f21b2b1d-84a2-4503-80f3-3d7cfac31beb. I managed to print this vertically without a raft or brim and used 150 microns, first time I have tried this layer height, which provided a good compromise between detail and speed. Just two outer shells and 35% infill would be needed. I would hone the M8 threads with a metal M8 nut or bolt if they feel a little too stiff, as they will break if over stressed. Print Settings: Printer Brand: RepRap Printer: Wanhao Duplicator i3 Rafts: No Supports: No Resolution: 150 microns Infill: 35%