Wanhao Duplicator 6 D6 - Monoprice Ultimate Maker - Rear Holder for run-out sensor, ribbon cable, filament filter, tube and pulley

thingiverse

Print: 1 Total Rear Holder 1 Adapter spacer 6x8mm 2 Filter Filament 2 Conical Pulley The flat washer is only necessary if the M6 bolt head tends to fit the bearing, requiring a distance to be created. The spacer adapter must be positioned between the pulley and the Total rear holder. To complete this project you will need: - 03 Magnets 20x6x1.5mm (https://www.amazon.com/dp/B00382J9UO/ref=cm_sw_em_r_mt_dp_U_wpLgDbVPXPR1R) - 01 bolt with nut M6x20mm (https://www.amazon.com/dp/B07NGHSDT7/ref=cm_sw_em_r_mt_dp_U_BqLgDbJMZZV91) - 02 bolts with nut M3x20mm (https://www.amazon.com/dp/B073SS7D8J/ref=cm_sw_em_r_mt_dp_U_dxLgDb8F5EY9N) - 01 ball bearing 608 (https://www.amazon.com/dp/B071W18NQN/ref=cm_sw_em_r_mt_dp_U_CzLgDb46P32KW) - 01 run-out sensor micro switch (https://www.amazon.com/dp/B07FSXFPLD/ref=cm_sw_em_r_mt_dp_U_ZALgDbDWR4CFG) The run-out sensor holes are designed to allow perfect centering with the upper hole and also with the filament tube. The support attaches to the printer via snap clips in the rectangular aperture, making it more stable with two small strips of double-sided tape. The magnets can be removed if the orientation is wrong, once you find the correct housing we recommend applying a small drop of Loctite Attak (cyanoacrylate glue). The two parts of the pulley fit together using the ball bearing, but even here two drops of Loctite Attak ensure everything stays in place. The links provided are for informational purposes only and do not need to be purchased.