wanhao D9 Mk3 Extra Sockel für
thingiverse
The cooler is a D9 Mk3 400 with a 33mm height and 50mm diameter. It requires an additional socket for the Noctua NF-F12 iPPC-24V-2000 Q100 IP67 PWM fan, which has a four-pin connection, spins at 2000 RPM, and operates on 24 volts. Remove the original 40mm fan by unscrewing the bottom plate. Cut the bottom plate using a Dremel, Flexcutter, or jigsaw to accommodate the new fan. Disconnect the wires from the original fan's socket and connect them directly to the Noctua fan. Alternatively, use an adapter with a four-pin connector to connect the Noctua fan to the motherboard. The fan installation is straightforward: simply plug in the four-pin cable and secure it with screws. The fan will blow air inward and provide adequate cooling. To further optimize performance, consider adjusting the fan's speed using software or hardware controls.
With this file you will be able to print wanhao D9 Mk3 Extra Sockel für with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on wanhao D9 Mk3 Extra Sockel für .