Wall slide-in mount

prusaprinters

Using PETG for higher strength, securing it with 4x 4.5x15mm flat head screws to secure a higher strength, this wall mount will hold anything, I would estimate a 2kg per unit pair if used as demonstrated. Print Rules for maximum strengthAll parts printed with PETG or stronger filaments, the ready provided g-code is using best settings for eSun filaments but works well with Prusa's filament too.Item attachment (socket) must be printed standing so it doesn't require supportWall attachment (Pin-hole) must be screwed tight but not at a cracking point, and must have infill of 20% or more.Spacingsby default the (socket) has a 2.5mm spacing and most screw heads are from 1-3mm so you have a minimum spacing of 10mm clearance, so to control the spacing from the wall just use one of the provided pin-hole sizes:17.5mm will give you 20mm wall spacing (included in the G-Code)10.5mm will give you a 12.5 mm wall spacing