Wall Mounted Organizer/Drawers

cults3d

A serious wall-mount drawer system, the thing is yuuuge and solid! It's exactly what I needed, but I needed it wall-mounted. So here's my remix of a remix. Thanks to Dan O'Connel (O3D) on Thingiverse https://www.thingiverse.com/thing:1743145 (https://www.thingiverse.com/thing:1743145) and Ambros Ecke https://www.thingiverse.com/eckesolutions/designs (https://www.thingiverse.com/eckesolutions/designs) for the remix and good sizing. Remix Source: https://www.thingiverse.com/thing:2862455 (https://www.thingiverse.com/thing:2862455) Original: https://www.thingiverse.com/thing:1743145 (https://www.thingiverse.com/thing:1743145) For all other parts of this drawer/system head back over there and give them a like or a make! This closes in the back of the drawer box and adds 6 centered guides for drywall screws. You'll need a long screwdriver. :) Screws do NOT need to be used, it has a 1.5mm solid back with nothing visible from the outside. Use double-stick or Velcro or whatever you like, this just provides the supporting surface space. I had to reinforce the drawer handle because that is a weak point even if things are printed slowly. I had one snap off without any mishandling as seen in pics. I'm hoping the bit of reinforcement works, have not printed yet it takes too long. Nothing special about print settings, these are so big low-quality is required and you definitely want to find the highest speed settings you can. If you don't, print time is in days. I used a hammer to pound in the box connectors (see Connector.STL on Thingiverse). They're so cheap and tiny print 20x at once and you'll have them in probably less than a half hour. Minor info update 2.25.23: The reinforced drawer handle actually does protect against my fat fingers! Added "actual" info direct from OctoPi which is the result of BOTH box and drawer. Also, WARNING: Do not start wall-mounting anything until you have all the boxes connected that you want! Lol.. Oops. All the junk in the latest pic is only (very firmly) held by two drywall screws in the left/right outer boxes.