wall mount for 20 port 100W USB charger station

thingiverse

wall mount brackets for 20 port USB charger station (100W / 20A), that allows also modification of the charger for better cooling and/or dust protection if needed. Also a small air filter sheet can be inserted in case you want to drill additional air intake holes into the charger. unmodified, the charging station sucks in air through the USB ports, which might be a disadvantage in dusty environments. It was designed carefully - for instance also the draft angles of the charger's walls are considered, as well as the fact that the foil on top of the charger is a little higher than the rest of the box. Both holders could be used on either side of the charger without any modification - nevertheless there is one design for the fan side, that also has a cutout on top so that the "g" in the words "USB Charger Station" is not being covered, while the bracket for the side where the cable is connected has some extra features. You can drill holes in the charger to create an air inlet, while the ribs on the bracket help to cover them against larger objects and against someone touching high voltage parts in case you drill large holes. Besides that, a small foam sheet or similar can be put in between holder and charger to add air filtering, if needed. There is some extra space designed in for that. On the other hand, the bracket for the side where the fan is placed does not have any ribs or such to allow best air flow away from the device. The clamp force of the brackets is designed in a way that the USB charger cannot move or rattle, but also without putting too much stress on the printed parts. The charger can be widely found on Amazon and AliExpress - take care, it seems there are versions without fan as well.