Wall lamp “Robur tree”

myminifactory

Would you like to support my work? :) Check out my full catalogue with exclusives, early access and commercial licences.   A beautiful and easy to craft wall lamp sculped after a old oak branch (Quercus Robur).   What you need The 3d printed parts A lamp kit including a plug, cord, switch, socket and bulb – available cheaply online and in your local hardware store A little glue Wall fixation: Either screws and dowels, wall mount tape or wall mount glue. Old fashioned screws and dowels are the most reliable fixation.   Included parts Body: The Branch Holder: the holder with a screw-hole diameter of 5.5mm Clip_6_0.1: The cable clip for a maximum cord diameter of 6 mm and a clearance of 0.1 mm for quite accurate printers Clip_6_0.2: The cable clip for a maximum cord diameter of 6 mm and a clearance of 0.2 mm for messier printers Clip_8_0.1: The cable clip for a maximum cord diameter of 8 mm and a clearance of 0.1 mm for quite accurate printers Clip_8_0.2: The cable clip for a maximum cord diameter of 8 mm and a clearance of 0.2 mm for messier printers   Instructions Measure the diameter of your cord and choose your clip accordingly - print it twice Print the body and holder Glue the clips into the Body - check the images for orientation! Mount the holder with your chosen wall mount product Insert the cable through the base clip, wrap it around the branch and plug it into the branch clip. Insert the lamp onto the holder Enjoy your new lamp!