Wall Bracket for wider Power Strips (Version 2 up to 59 mm)

prusaprinters

<p>This is Version “2” of the wall bracket. It has more space for a power strip of up to 59 mm width (height 42). Please check also my first version of the wall bracket for additional informations.</p><p>If have printed the bracket with PLA. This version of bracket needs support in four areas, the overhang there is to big. Please have a look at the attached picture (screenshot PRUSA slicer).</p><p>Do you know “Flying” power strips because the cords are too short or clutter on the floor. With this easy to print wall bracket you have a better "home" for a power strip.</p><p>Fix it with two or four screws on the wall and place a suitable power strip temporarly in it. I have tested it with some different German types of power strips but not all will fit.<br><br>Wenn using the bracket, make sure that the plug or power supply is still unobstructed in the power strip, when this is not possible, don´t use this model of wall bracket and design your own. When use a part for electrical devices please note your local code.</p><p>For the design I have used Fusion 360 and the Prusa slicer.</p>