Wall Bracket for Power Strip

prusaprinters

<p>Do you know “Flying” power strips because the cords are too short or clutter on the floor. With this easy to print wall bracket you have a better "home" for a power strip.</p><p>Fix it with two or four screws on the wall and place a suitable power strip temporarly in it. I have tested it with different German types of power strips but not all will fit. The bracket is fine for a power strip with a height of 42 mm and a width of 44 mm. I will design a bigger bracket later on.<br>&nbsp;</p><p>Wenn using the bracket, make sure that the plug or power supply is still unobstructed in the power strip, when this is not possible, don´t use this model of wall bracket and design your own. When use a part for electrical devices please note your local code.</p><p>If have printed the bracket with PLA. The bracket needs support in two areas, the overhang there is to big. Please have a look at the attached picture (screenshot PRUSA slicer).</p><p>For the design I have used Fusion 360 and the Prusa slicer.</p>