Wall Anchor Mount For Ikea Shark

prusaprinters

<p>A big hook for hanging up an IKEA shark to keep him off the ground.</p> <p>There are 2 versions - one with a hole at the top of the anchor, and one with the hole filled - the filled version is for hanging with command strips, which work well with one on top and one on the bottom.</p> <p>This was designed in Fusion 360, and the original CAD is in the downloads for easy modification. If you do use that, note that I originally modeled this way too small to hang up an IKEA shark, so the STLs here are scaled to 150%. You can apply a scale modifier in your print settings, or as the last step in the Fusion360 file (Modify&gt;Scale) before exporting.</p> <h3> Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Prusa</p> <p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>I3 MK3S</p></div><strong>Rafts:</strong></p> <p>No</p> <p><p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div><strong>Resolution:</strong></p> <p>.05-.2mm</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>Only needs supports for the upper 2 barbs. I used "generate supports from bed only" and adjusted the angle threshold until it left most of the hook unsupported except the barb.</p> Printing in the orientation pictured, the angle of the shaft is really shallow and will show FDM stepping artifacts. Using variable layer heights there and at the top of the 2 upper hooks hid this very well in this case, while keeping the overall print short and maintaining a good looking finish.</div></p> </p></p> Category: Decor