WalkSnail VTX mount 30x30 to 25x25

thingiverse

Walksnail VTX mount for my Mk 5. It should fit other frames. The total height is 13mm and the clearance under the platform is 10mm. I printed it in polycarbonate but PETG should be fine, and I even flew a few packs with a PLA prototype until I crashed hard and broke it. There are two features that make this mount special. Firstly it has a recess for your cam cable if you want to route it under the FC. this should free up an extra mm or so by providing a direct path. The second feature is the set of 2mm holes that sit conveniently directly under the ufl antenna connectors. I lost the little plate that secures my antennas so these holes provide a place to glue in some extra filament and trim to 1-2 mm. Trim it just enough so it holds the antenna to the connector when you screw the vtx down to the platform. If you look closely at one of the pictures, you can see how this is working in my setup. No more disconnected antennas from relatively minor impacts. Obviously print this upside down with no supports. Enjoy! Updated 3/18/2023. Added some different thickness and lengths. File Key: 3p13l = 3mm thick plate 13mm total height (original design) 3p12l = 3mm thick plate 12mm total height 3p11l = 3mm thick plate 11mm total height 2p12l = 2mm thick plate 12mm total height the naming convention follows the above trend files named with just a thickness and a dimension are spacers if you want to try and get extra space between the vtx and the plate. I dont know exactly what you need or want so I just included files for spacers between 1.5 and 3mm thick. They should have a 4mm OD and a 2.3 mm id (will vary depending on your printer and settings). Let me know which ones work - as I have not tried any spacers myself.