Wade L3K Extruder (prusa I3) compatible filament flexible By Skarab (JHead - Hexagon - E3DV6 - Aluhotend V7 et AllinOne Compatible)

thingiverse

A long list of components and modifications for a 3D printer! I'll break it down for you: **Required parts:** 1. **Closed GT2 belt teeth (200mm)** 2. **GT2 16T pulley** 3. Downloaded STL files from Thingiverse: * Body - 1.75mm version * Hotend Flange - 1.75mm version * Idler V2 * Big Gear * Small Gear * Print Fan Duct (right and left) - 40mm version * Hotend Fan Mount - 40mm, Hexagon JHead **BOM (Bill of Materials):** 1. Hobbed bolt: sourced from eBay (link provided) 2. Screws: * M3x10 mm x 3 (Din 912) for hotend mount and idler * M3x12 mm x 3 (Din 912) for motor mount * M3x30 mm x 5 (Din 912) for various uses (idler, small gear, hotend, etc.) 3. Nuts: * M8 nuts (Din 934) x 2 * M3 nuts (Din 934) x 5 4. Hex socket (DIN 913): 6mm, M3 5. Shafts and bearings: * M8x20 mm shaft * 608 bearings: 3 * Springs: 6x6mm, 2 pieces **Instructions:** 1. Print all STL files according to the instructions. 2. Remove printing supports from the idler and big gear. 3. Install the hobbed bolt on the hotend flange. 4. Attach the M3x30 mm screws to various components (idler, small gear, hotend, etc.). 5. Mount the motor using the M3x12 mm screws. 6. Connect the fans to their respective fan mounts. 7. Install the hotend fan mount on the x-carriage plate using M3x10 mm screws. Note: This project requires assembly and mechanical skills. Make sure to follow proper safety guidelines when working with 3D printed parts and mechanical components.