W2D-VI Bronco Style SCX10 Clone Body

thingiverse

Hi guys, This is a Bronco style body for use with an SCX10 clone (or other crawler with some mount point tweaks). This is designed for use with my Jeep Roll cage. You can use the rear mount similar to the Jeep setup (Bronco_Rear_Body_Mount_V1) or use the Bronco Body Mount for both ends. The dash mounts to the cage. The Bumper mounts are very slightly modified from my bumper mount kit with holes for the body mounts. Otherwise they are the same as the bumper mount kit ones. The floorboard is modded from my Jeep ones so it should work fine. I didn't make a 2 piece version. No inner finders yet but the ones for the Jeep might kinda sorta work, or a little DIY with card board and electrical tape will probably get you there. I haven't printed it yet but it's based on my previous Jeep body's dimensions so it should work basically fine. I probably won't get around to building it soon, so here it is. Fill your boots. Pretty much all the parts are designed to be printed lying down. My plan was to use fairly dense supports and leave them in place for gluing DIY interior panels on top. I'm thinking that might give a pretty realistic look, but I haven't tried it yet. Assembly is designed to be with pins and glue. I included a 2.5mm pin for the body panels and a 5mm pin for the body mounts, but I would use something like finishing nails cut to size for better strength. I've had good success with super glue on PLA parts and hot glue works pretty well too. You can use white glue to smooth the plastic before painting and it works pretty well. The hood and windshield will need to be glued in place by whatever means necessary. I don't think it will be a problem, but if you build this and have problems with something, let me know. Jeep Cage: https://www.thingiverse.com/thing:4610573 Jeep Body: https://www.thingiverse.com/thing:4671977 Bumper mount kit: https://www.thingiverse.com/thing:4617755 Front bumper: https://www.thingiverse.com/thing:4588243 Rear Bumper: https://www.thingiverse.com/thing:4653515 Wrench to drive or drive to wrench?