VW Super Beetle Front Bumper Gasket

myminifactory

Printed on flexible material known as HINOFLEX. The specific type of plastic used is PLA 1.75mm in size. A nozzle with a diameter of 0.4mm is utilized, along with a quality setting also set to 0.4. The temperature during the printing process is maintained at 190 degrees Celsius. There is no bed temperature adjustment made. The maximum speed allowed for this print job is 40mm per second. The infill percentage is set at 5%. A rectilinear fill pattern is chosen. For the top layer, two layers are printed, while three layers are printed for the bottom layer. Three perimeter passes are also made. This specific model is a Printrbot Simple Metal. It was printed in two separate parts before being glued together using the same type of HINOFLEX filament melted at 210 degrees Celsius.