VW Corrado G60 logo front grill

prusaprinters

<p>18.may 2019<br/> confirmed, eventually use PETG version, but personally I prefer ABS version</p> <p>Still in development.<br/> Not for commercial use.</p> <p>Howdo: insert the upper part of the logo into the bottom and click the rods, use glue or hot iron.<br/> If you need to use the drill bit or rasper to increase the holes in the bottom part (by hand, not electricity).</p> <p>Logo G60 front grill for VW Corrado (1989-90 model i think).<br/> I make one for my friend.<br/> The original batch was used as a pattern for this</p> <p>Printed from several materials, testing Creality PLA white / Gembird ABS black / Plasty Mladec PETG black. I recommend printing ABS (I also tested PETG, but ABS is clearly for this better).<br/> Support for lower (bottom) part (ur choice).<br/> Bottom version 02 has more support in brackets.</p> <p>ABS prints on my Ender 3, without enclosure, i used Gembird ABS black, no smell, occasionally WARP (room temperature and around the printer, i suppose, who know, newbie in 3d print).</p> <h3>Print instructions</h3><p>Unassociated tags: front batch</p> <h3>Category: Other Summary</h3> <p>18.may 2019<br/> confirmed, eventually use PETG version, but personally I prefer ABS version</p> <p>Still in development.<br/> Not for commercial use.</p> <p>Howdo: insert the upper part of the logo into the bottom and click the rods, use glue or hot iron.<br/> If you need to use the drill bit or rasper to increase the holes in the bottom part (by hand, not electricity).</p> <p>Logo G60 front grill for VW Corrado (1989-90 model i think).<br/> I make one for my friend.<br/> The original batch was used as a pattern for this</p> <p>Printed from several materials, testing Creality PLA white / Gembird ABS black / Plasty Mladec PETG black. I recommend printing ABS (I also tested PETG, but ABS is clearly for this better).<br/> Support for lower (bottom) part (ur choice).<br/> Bottom version 02 has more support in brackets.</p> <p>ABS prints on my Ender 3, without enclosure, i used Gembird ABS black, no smell, occasionally WARP (room temperature and around the printer, i suppose, who know, newbie in 3d print).</p> <h3> Print Settings</h3> <p><strong>Printer Brand:</strong> Creality</p> <p><strong>Printer:</strong> Ender 3</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> Yes</p> <p><strong>Resolution:</strong> 0.2</p> <p><strong>Infill:</strong> 15%</p> <p><strong>Filament:</strong> Gembird ABS Black<br/> <strong>Notes:</strong></p> <p>Printed from several materials, on the photos of Creality PLA white and Gembird ABS black. I recommend printing ABS (I also tested PETG, but ABS is clearly for this better).</p> <h3> How I Designed This</h3> <p><strong>how did I create it?</strong></p> <p>I used photos, caliper, original batch G60. Fusion 360, patience, several test prints for coloring and for different plastic properties - for testing.</p>