Vuse Vapeholder

prusaprinters

<p>Hi 3D printing friends! &nbsp;This is another holder design but made for the Vuse Vape to help organize your desk. &nbsp;It is meant to hold 3 full devices, the right most spot is built to hold the charger (press fit), and the front 3 spots are for additional cartridges. &nbsp;</p><p>Similar to my other design, it has a singular base and separate inserts so you can mix and match colors for a personalized design. &nbsp;There are three types of inserts and all three are designed to just press into place (flush with base top). &nbsp;You can use glue if desired, but shouldn't be needed. &nbsp;The charger should press in from the bottom right up against the insert in that location.&nbsp;</p><ul><li>Charging Spot Insert - Qty 1</li><li>Full Device Insert - Qty 2</li><li>Cartridge Insert - Qty 3</li></ul><p>Recommended Settings (PLA):&nbsp;</p><ul><li>0.4 mm nozzle</li><li>0.2 layer height</li><li>10% infill (gyroid, base only)</li><li>No supports<ul><li>All holes facing upward for base.</li><li>Top finished edge facing downward for inserts.</li></ul></li><li>No raft or brim</li></ul>