Vulcanus V1 (Rework 2016) MGN12 linear rail upgrade

thingiverse

I really like the Vulcanus V1 design by Vulcaman - you can find his instructable here: http://www.instructables.com/id/Vulcanus-V1-3D-Pri... But I had some problems when building a complete enclosure for the printer - the carriage for the x-axis was rubbing on my enclouser and after about 3 months failed. So I decided to make my own design / upgrade for the Vulcanus V1 with some MGN12 rails I had laying around. My design uses the z-stage and frame of the Vulcanus V1 (2016 Rework) but the x-y-stage is completely changed and runs on MGN12 rails. Also, I made the design to perfectly fit the E3D V6, E3D Titan and an auto bed leveling probe (inductive sensor). https://youtu.be/A3nNJD9jw6s Custom Section Parts List For the upgrade you'll need following parts: 1x MGN12 rail with carriage (12H) - 315mm long (x-axis) 2x MGN12 rail with carriage (12H) - 400mm long (y-axis) 2x 4020 aluminium extrusion - 400 mm long 1x 2020 aluminium extrusion - 354 mm long 6x M4x35mm screw 6x M4 hex nuts 2x M3x30mm screw 9x M3x10mm screw (at least - to fit MGN12 to aluminium extrusion) 9x M3 T-slot nut (at least - to fit MGN12 to aluminium extrusion) Some corner brackets (for aluminium extrusion), T-slot nuts, M3, M4, M5 screws and nuts - If you have the parts from the Vulcanus they should be enough 1x E3D Titan 1x E3D V6 1x LJ12A3-4-Z/BX (inductive probe)