Voron V0 Pi and BTT Pico mounts
prusaprinters
Remix of Measure Once Print Twice's great Voron V0 Raspberry Pi Zero/3/4 mount (for the LDO kit). Not sure if this will work on kits other than LDO. I didn't need the Pi Zero part of the mount, so I removed that, as well as shifting the mount towards the center a bit. I changed the mounts to accept M2 self-tapping screws, and I mirrored it as well so that I could mount my BTT Pico on the opposite side. Nice and clean, leaves lots of room for the Pi hat, fans, etc. Requires either 2 nuts per side to be pre-mounted under the predrilled panel holes in the LDO kit. I used 2 M3x10mm per side for mounting the brackets, then 4 M2x10 self-tapping screws per side to mount the Pi and the BTT Pico. You have to mount the bracket first, then mount the Pi or Pico to the bracket.
With this file you will be able to print Voron V0 Pi and BTT Pico mounts with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Voron V0 Pi and BTT Pico mounts.