Voron V0.1 Toolhead Cable Collar

prusaprinters

<h4>Brief:</h4><p>I wanted to enhance the interface between the Voron V0.1 (or V0) Toolhead Cable Loom and rear frame plate. The standard rear frame plate allows for a significant amount of movement of both the Cable Loom and PTFE tubing. The extra space also creates a channel for heat to leak into the electronics compartment from the build chamber.&nbsp;</p><p>My design needed to secure the Cable Loom and PTFE tubing at the junction of the rear frame plate, reduce heated air transfer into the electronics compartment, and be simple.&nbsp;</p><p>I utilized TPU with moderate flexibility to print a collar that will secure the junction and create a relative heat barrier. The modification is not permanent and does not alter the existing hardware in any way.</p><h4>Printer Settings:&nbsp;</h4><p>Layer Height: 0.2 mm&nbsp;</p><p>Perimeters: 3</p><p>Infill: 15%&nbsp;</p><p>Infill Pattern: Grid</p><p>Top/Bottom Layer: 5</p><h4>License:</h4><p>Remixes allowed. Please follow Creative Commons Attribution Non-Commercial License. It is okay to print for yourself, not okay to sell.&nbsp;</p>