Voron Stealthburner Umbilical - Door, mount for BTT EBB36 and gland

prusaprinters

On my Voron 2.4r2 i have an BTT EBB36 v1.2 installed. Since the board is mounted on the back of the LDO Nema 14 stepper behind a ClockWork 2 the cables came extremely close to the drag chain when homing. Also the wires were exposed on the Stealthburner.I've remixed the door to have my Stealthburner encapsulated and open in the back. This way i still can use the door but have everything packed. I've included the EBB36 v1.2 mount and spacers. This package is for usage with Voron Tap.The door needs to be printed with support, mounts don't need supports. Printed mine in eSUN ABS+ Black with 110c for bed temp and 250c for hotend temp. You also need 3 hot inserts (1 for the chain anchor replacement, 2 for the EBB36 mount)Printable gland is from another mod i've credited as well. Just made it shorter for less z-height loss.  When installing: Install the door first, after that install the chain anchor replacement with 1 screw from the front of the motor plate.