Voron compatible Prusa X carriage

prusaprinters

<p>The titla says it, this is an x carriage that allows you to use the Voron toolhead ecosystem on a Prusa. The carriage has been modified from the Voron Legacy x carriage.</p><p>You will need Bear x ends to use this - <a href="https://github.com/gregsaun/bear_extruder_and_x_axis">https://github.com/gregsaun/bear_extruder_and_x_axis</a></p><p>I repeat, stock x ends will not work because of the belt path. If you use stock X ends, your x moves will be nonlinear.</p><p>&nbsp;</p><p>BOM :&nbsp;</p><ul><li>all parts from this, printed in ABS or ASA (PETG should work too)</li><li>all parts for the Voron toolhead you want to use - depends on which one you want, refer to the Voroon sourcing guide</li><li>one M3 hex nut</li><li>two LM8LUU bearings</li><li>one M3x6 screw</li><li>seven heatset inserts, the same kind that is used on all Voron parts (M3x5x4)</li><li>three M3x40 screws</li><li>two M3x30 screws</li><li>two M3x20 screws</li><li>two M3x16 screws</li><li>a PL08 or PL05 inductive probe</li><li>one M2x12 screw (you can reuse one from your Prusa kit)</li></ul><p>&nbsp;</p><p><strong>IMPORTANT UPDATE&nbsp;</strong></p><p>Make sure you print the x carriage and x ends in the same material. This helps prevent misalignment, increasing axis precision and prolonging bearing and rod life.</p><p>&nbsp;</p><p>Licensing and attributions:</p><p>Licensing on this model is a bit complicated. The cable tail has been reused without modification from the Skelestruder project : <a href="https://www.thingiverse.com/thing:2845416">https://www.thingiverse.com/thing:2845416</a></p><p>Thus, <strong>the tail is licensed under Creative Commons - Attribution.</strong></p><p><strong>The rest of the models are licensed under GNU GPL v3.</strong></p><p>The x carriage has been modified from the Voron legacy parts : <a href="https://github.com/VoronDesign/Voron-Legacy">https://github.com/VoronDesign/Voron-Legacy</a></p><p>I would also like to give credit to the Afterbearner (<a href="https://www.prusaprinters.org/prints/54545-afterbearner-the-prusa-bear-afterburner">https://www.prusaprinters.org/prints/54545-afterbearner-the-prusa-bear-afterburner</a>) which is basically the same thing. My aim was to recreate what was done there, but without changing the X ends and with cleaner, easier to edit cource files.</p><p>&nbsp;</p>