Voron Afterburner/Stealthburner adapter plate for Ender 3 v2 / Orbitor v1.5

prusaprinters

Update 2022-12-29 - Did a quick virtual fit in fusion360. It should all fit the Voron stealburner as well.Just print the toolhead and body. Use 2x M3x16 for the front-middle instead of the 2x M3x25 in the Stealthburner manual. Else it will hit the Orbiter adapter.Currently in the process of printing the parts for a physical fit, but I have currently no reason to believe it will not. See extra image attached for the 3d render.Original post - Someone on reddit asked me on a year old post if I could share my files for the Voron Afterburner, mounted on an original Ender 3 v2 carriage plate and an Orbitor v1.5 extruder.It also has a mount for a BLTouch, was planning to redesign that to make it a bit stronger (it's a bit fragile), but a year in and it's still going strong. So never got to it.Use all the original Voron Afterburner STLs from the original repo. Except for the adapter plate / motorplate and what's needed for the extruder. Those will be provided here.Once I figured out Fusion 360 a bit better, I'll also clean up the models and release it on github. I used the Voron recommended print settings and as I can't (safely) print ABS yet, it's done in PETG. No deformation or failure just yet and have been running this since September/October 2021.Prints require no support, but do need a few heat inserts (see images to know where). Standard m3x5 inserts.If things aren't clear, feel free to contact me. I will come up with some better docs and BOM for this, but at the time of upload, I wasn't planning to do any of it. Just helping a fellow maker.All images posted are for the Ender 3 v2. While there are also mounting holes for the Ender 3 Pro, this isn't properly depicted in the images. So make sure you pre-fit before inserting all the heat inserts.BLTouch offset for me in klipper:x_offset: 39y_offset: 13