VORON Afterburner Mount for CR-10S Pro

thingiverse

It appears that you have provided a detailed log of your 3D printing project, specifically the VORON design. The log covers various dates from 2020.06.01 to 2020.05.15, detailing the progress and issues encountered during the assembly and testing process. Here are some key points mentioned in the log: 1. **Misfits with parts**: You have reported misfits with several parts, including the tool head, filament sensor box back piece, and extruder body. These issues will be addressed by adding more tolerance to the design. 2. **Overheat issue with extrusion stepper**: The new stepper has a lower voltage than the stock one, causing overheating. This problem can be solved by adding a buck converter. 3. **Bed height concern**: The hotend tip on the AB toolhead is higher than the stock hotend, requiring the X carriage to be lowered. This almost caused issues with the Z stepper mount bar during testing. You have raised the hotbed to its highest position to resolve this problem. 4. **Filament sensor module**: Due to a lack of extension cables, you haven't installed or tested the filament sensor module yet. The log also mentions several upcoming tasks: 1. **Fixing part misfits and adding more tolerance** 2. **Designing a new drag chain mounting part on the PCB side** 3. **Testing the filament sensor module** Additionally, there are some notes about specific parts and their revisions: 1. **Filament_sensor_front**: A module for the original CR10S Pro sensor switch/chip set. 2. **filament_sensor_back**: The back piece of the filament sensor module (optional). 3. **extruder_body_fila_sen**: An extruder body part used to mount the filament sensor module with 2 M3 screws. 4. **5x1mm_washer**: A washer that might be needed for the extruder gear axle. Overall, it seems like you have made significant progress on your project, but there are still some issues to resolve before completion.