Voron 2.4 Umbilical Exhaust Grill for PUG

prusaprinters

Description:Use the excellent Parametric Umbilical Gland (PUG), instead of a PG7 or similar, to secure your Voron umbilical through the exhaust grill. It also provides a location for the reverse bowden tube. You can use the Parametric Umbilical Clip (PUC) to hold the umbilical and tube together.Parts:2x M3x5x4 (Voron standard) heat set inserts2x M3x18 or 20 socket head screwsPrint Settings: ABS/ASA/PETG, 0.4 mm nozzle, 3 wall lines, no support, 0.2 mm layers. Assembly Notes: Heat set inserts are pressed in from the back. The PUG Clamps can attach a PUG to just about anything flat with room for two M3 screws 24 mm apart. It holds PUG in place by going around the outside of the linking features, and for extra security those features are slightly off-center so it clamps when tightened. It's easiest to put one screw most of the way in on one side of the PUG Clamps as seen below, pass the cable through, then add the PUG. Once everything is in position, add the other screw (you may need to squeeze together a bit). Screwing them both tight will clamp the PUG in place.Updates:2024-02-21 - Updated PUG Exhaust Grill to shift the PUG adapter to the right, freeing up the reverse bowden path and making it not captive anymore. Reduces filament friction considerably. Added STEP file of the assembly.