voron 2.4 / trident with clicky clacky door touchscreen mount

prusaprinters

with the clicky clacky door the lcd screen is hidden under the door making it hard to see and use the screen. this will pull the screen out so its in plain view again. this is intended for the Waveshare 4.3 lcd screen (ldo kits include this screen) or you can also use a btt 5in pi tft v2.0 if you use this bezel Voron Mods - BTT PITFT50 v2 Mount by alanho (vorondesign.com)hardware needed is the screws for the lcd screen included in the box.4 Voron m3 x 5 x 4 brass heat set inserts3 20 series extrusion m3 thread t nuts (roll in or hammer head)7 m3x8 socket head screws (the 4 to screw the bezel to the mount can be 6mm as well)standard Voron print settings.4 walls, 5 tops, 5 bottoms, 0.2LH and 40% infill however you could drop infill somewhat.prints with no supports you can pick the no text mount or the one with text. its the same mount other than the friendly reminder you left the door open on your printer. text is only visible when the door is open. then print the bezel that matches your screen.UPDATE. 1/16/2024.   some of you may have a 4.3in sreen with plugs and buttons on the bottom, in that case i would look to a remix posted on my model. If you like this model buy me a coffee if you wish. Its appreciated not expected https://paypal.me/jwoody05?country.x=US&locale.x=en_US