Voron 2.4 Rear CANBUS Umbilical Mount IMPORTANT UPDATE
prusaprinters
<p>I am upgrading to a CAN setup on my Voron 2.4 and I needed Rear mount and Y endstop relocation bracket. I remixed this excellent model intended for Huvud to better fit my needs.</p><p>IMPORTANT UPDATE No More Cable Gland, Could not overcome clearance issues. Same with the Fan mount.</p><p>v13 - Taking it back old school… <i>grumble</i> No more cable gland. Split body to make it easier to assemble. Should snuggly hold a 10mm umbilical. I may repost V10 with a bumper for Y clearance.</p><p>Check and recheck your clearances before homing! I found out the hard way I had interference</p><p>*Side note not related to model. If you are using EBB36 on a Galileo, you need a thinner Z chain for the same reason. I ended up doing all umbilical.</p><p> </p>
With this file you will be able to print Voron 2.4 Rear CANBUS Umbilical Mount IMPORTANT UPDATE with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Voron 2.4 Rear CANBUS Umbilical Mount IMPORTANT UPDATE.