Voron 0.1 Orbiter Blockhead Print Head and X-Carriage
prusaprinters
<p>Remix of the Sherpa Blockhead Dragon print head.</p><p>Changes:</p><ul><li>Use Orbiter V2 extruder</li><li>Thicker blockhead for stronger hotend attachment</li><li>Four screws with washers to attach Dragon hotend. Washers spread load.</li><li>Heat set inserts to attach hotend fan. </li></ul><p>The thicker blockhead lowers hotend slightly so you may need to adjust position of Z axis limit switch. Use longer M2.5x16mm screws to attach the Dragon hotend, ideally also use M2.5 washers.</p><p>Also included is a modified X-Carriage with 4 screws for the linear rail carriage (two M2x8mm, two M2x10mm). Can also use washers to distribute stress on the carriage. The X-axis limit switch requires two self tapping screws to attach, instead of just one in the original design.</p><p>Print in ABS. I prefer to print with 100% infill on the blockhead and x-carriage.</p><p>Follow assembly instructions from the original Make: <a href="https://www.printables.com/model/213588-sherpa-blockhead-fan-system-for-voron-01">https://www.printables.com/model/213588-sherpa-blockhead-fan-system-for-voron-01</a> </p><p>…. and with 2 additional M3 heat set inserts for the hotend fan and customised length of bowden tube.</p><p><br> </p>
With this file you will be able to print Voron 0.1 Orbiter Blockhead Print Head and X-Carriage with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Voron 0.1 Orbiter Blockhead Print Head and X-Carriage.